oksite.blogg.se

1. INSTALLING FREEFILESYNC IN A WD EX4100 INSTALL
2. INSTALLING FREEFILESYNC IN A WD EX4100 UPDATE
3. INSTALLING FREEFILESYNC IN A WD EX4100 DRIVER

INSTALLING FREEFILESYNC IN A WD EX4100 DRIVER

The Braswell SMBus driver for FreeBSD is called ichsmb_pci.

INSTALLING FREEFILESYNC IN A WD EX4100 UPDATE

I’ll update the first post when necessary. The following posts contain some notes I took during development. You can test the whole flow first by writing to a virtual disk instead of an actual disk. To go back to the My Cloud OS, shutdown the NAS, unplug the FreeNAS boot usb drive and reboot. The hardware control script may get some important upgrades in the future so check for available updates. Without temperature monitoring it may melt / burn. Read the script.ĭon’t fry your NAS by turning the FAN off. Hardware control is available, but use it with common sense. However, a preview of the webgui without creating an array is harmless… Your drives will be fully wiped when you create a ZFS array. You can’t import your existing data as FreeNAS does not support ext4 file systems. # FAN=20 # better not to rely on this low fixed fan speed value Manual interaction with the hardware can be done with screen and this list of commands. add shutdown conditions, weather forecast, recent downloads, … You may want to tune it to your liking… e.g.

Here’s a hardware control script that can be used as a post-init script. Hardware controlĪs of FreeNAS 11.2 you can control the hardware (fan, lcd, leds, …) as the kernel supports the braswell UART and I2C device. Pick a name for the pool and then select “Create” to initialize the pool. Select the ada devices from the available devices list and press the left arrow to move them to the Data VDev list. I’d definitely not write to that one as it voids your warranty. Then select “Create Pool” (or import an existing one).Īll available devices are now listed, including the internal mmc flash. In the left column, select “Storage”, then select “Pools”. The NAS supports hotswap so you don’t need to shutdown. I’d suggest to only insert the drives you want to be used, unplug the others. The file system is incompatible with the original OS. Warning: this will erase all data on the disks. (change this asap!) Create a storage pool Open this IP address in your browser and enjoy FreeNAS! Reboot, wait about 5 minutes and lookup the IP address on your router. Plug the USB flash drive in the PRx100 NAS. Make sure you select UEFI bootloader during the installation process. Qemu needs to find bios.bin in the bootloader path.

INSTALLING FREEFILESYNC IN A WD EX4100 INSTALL

Run the installer on a virtual machine with UEFI (and 2G ram) and install to an empty USB flash drive (at /dev/sdX). Get the FreeNAS installer ISO (v11.2) on the website. dd if=fn.img of=/dev/sdX bs=4MĪlternatively, create your own FreeNAS boot disk with debian/ubuntu On windows, you could use rufus to flash it. Here is a zipped image of FreeNAS 11.2-U3 you can flash to a USB drive of at least 16GB. Recommended to run with 2x 8GB DDR3L SODIMM ram.įreeNAS requires at least 8GB ram, so it probably doesn’t work on the PR2100.